Cast Aluminum Circle Cut Plate
Cast Aluminum Plate
Cast Tool & Jig Plate saw cut circles are cut oversized to allow to machine clean up. The Band Saw will leave light ridges for our circle saw, not smooth
Standard Cut Tolerance: +.375"/-.00"
Aluminum Cast Tool & Jig (ATP 5) plate is vertical cast, stress-relieved, machined plate providing sound dimensional stability with minimal or no distortion even after extensive machining operations.
Cast Aluminum Plates have a precision machined surface for superior flatness, flat within .015'', and +/- .005'' thickness tolerance, and are protected with PVC plastic on both sides. Cast Aluminum Plate typically has a surface finish of 25 RMS or better. ATP 5 has a tensile strength of 41KSI a Hardness of 70HB and a Yield Strength of 18 KSI.
Cast Tool & Jig Plate ATP 5™ has outstanding machinability and responds very well in today’s high speed cutting environments. ATP 5 is the preferred choice for engineers that require a dimensional stable product that has great strength to weight ratio. ATP 5 cast tooling plate applications include, but are not limited to, Computer & Electronics, Pharmaceuticals, Machining fixtures, Drill jigs, Index tables, Semi-Conductor, Automotive Molds.
Cast Aluminum Tooling Plate or Jig Plate
Is known by various trade names:
Vista Metals ATP 5™ (a trademark of Vista Metals Corp.)
Mic 6® (a registered trademark of Aloca Inc)
Alpase K100-S® (a registered trademark of TST, Inc)
Alca 5™ (a trademark of PCP Canada)
Alimex 5083, ACP5080, ACP5080P (a trade mark if Alimex Aluminum)
Band saw cut Rings also available! call for a quote
Cast Plate has a tensile strength range of 43-44 KSI, and corresponds to* GM41, A95083, AlMG4.5Mn, Al Mg4.5 Mn0.7(*though may not be a direct equivalent)
- Magnesium 4.0-4.9%
- Manganese 0.4-1%
- Iron 0.4% (max)
- Silicon 0.4% (max)
- Zinc 0.25 (max)
- Chromium 0.05-0.25%
- Titanium 0.15% (max)
- Copper 0.1% (max)